Indoor Air Quality Solutions Blog

"Healthier Air Starts Here" (407) 383-9459


Indoor Air Quality IAQ Blog





Florida Mold Humidity Bloom

Florida Humidity Bloom Florida Indoor Air Quality SolutionsA humidity bloom is the growth of mold within a living space due to the elevation of indoor relative humidity at or above 60 percent relative humidity for a period of time greater than 72 hours and must be maintained for growth to continue. 

When the humidity is above 60 percent relative humidity, molds will germinate causing what is referred to as a mold bloom.   These molds can bloom in many colors and are often confused with dust, dirt, foxing, ghosting, or cobwebs.

Humidity for an extended period of time, typically in excess of 72 hours to initiate the bloom and must be maintained for growth to continue.  When the humidity is above 60 percent relative humidity, molds will germinate causing what is referred to as a mold bloom.   These molds can bloom in many colors and are often confused with dust, dirt, foxing, ghosting, or cobwebs.

Both active and inactive mold can have a distinctive smell, which most people describe as musty.

Active mold in the early stages of a bloom has hair-like filaments in webs, which develop a more bushy appearance as the bloom matures. This is more easily seen under magnification. Active mold is soft and may smear when touched with a fine brush. It may also be slimy and damp.  Inactive mold is dry and powdery and will seem to brush off materials readily.

Mold and mildew are words that refer to more than 100,000 species of fungi. Mold spores are present everywhere in our environment, generally in a dormant state where they do little damage. Spores require moisture to become active. They do not require light.

When water or high relative humidity provides the necessary moisture, dormant spores will germinate, grow fine web-like structures, and eventually produce fruiting bodies that release more spores. Most molds will germinate at 60 percent relative humidity. Increases in temperature can speed the growth rate of active mold.

There are 4 critical requirements for mold growth – available mold spores, available mold food, appropriate temperatures and considerable moisture. The removal of any one of these items will prohibit mold growth.

The only way to reduce the threat of mold in a home is to maintain an environment that is not hospitable for the germination of mold spores. The temperature should be 74-78 degrees F, and the relative humidity of 60% or less. It is important that the air conditioning system (HVAC) be kept on 24 hours a day, 7 days a week. Inconsistent operation or fluctuations in the temperature and humidity are the cause of many serious mold outbreaks.

Humidity
Humidity is simply vaporized water in the air. Your breath contains hundreds of droplets of invisible water vapor. You can see them when you breathe on a pair of cold glasses.

The term most often used to define the amount of water vapor in the air is "relative humidity." Relative humidity is the percentage of water vapor in the air at a specific temperature, compared to the amount of water vapor the air is capable of holding at that temperature. Warm air holds more water vapor than cold air. When air at a certain temperature contains all the water vapor it can hold at that temperature, its relative humidity is 100 percent. If it contains only half the water vapor it is capable of holding at that temperature, the relative humidity is 50 percent.

If the outside air temperature in winter is 0°F and the relative humidity is 75 percent, that same air inside your 70°F home will have a four percent relative humidity. The Sahara Desert has an average relative humidity of 25 percent.

When air is saturated with water vapor, it has reached the dew point; at this point, water vapor condenses and produces visible water or "condensation." In winter it usually occurs first on windows. When warm, moist air comes in contact with a cold window, air temperature drops and it can no longer hold the water vapor; condensation results.

Desirable Humidity Levels
The human body is comfortable when relative humidity ranges between 20 and 60 percent. In your home, an average relative humidity of 35 to 40 percent is appropriate when the outside temperature is 20°F or above. However, during cold weather, higher humidity ranges may cause structural damage because of condensation on windows and on the inside of exterior walls. As outdoor temperatures fall, condensation problems inside may develop.

The construction of a home also influences how much humidity is desirable. Tightly constructed buildings with properly installed vapor barriers and tight fitting doors and windows retain more heat and moisture. This is where mechanical ventilation becomes important. If a home does not have the proper mechanical ventilation, excess water vapor can move through walls and ceilings, causing wet insulation, peeling paint, and mold on walls and woodwork.

The recommended relative humidity is less than 50%.  Maintaining relative humidity below 50% inhibits mold and mildew growth, dust mite infestations, and bacteria. This lower relative humidity also reduces the out-gassing of volatile organic compounds (VOC’s). Molds are incapable of obtaining the moisture needed for their development directly from the atmosphere, but they can obtain it from a substrate, which has absorbed moisture from moist air (60% to 100% relative humidity). The relative humidity of the air has an indirect effect on fungal growth, and the more hygroscopic a material is, the more susceptible it is to mold growth. The minimum moisture content at which mold growth occurs depends on the material and usually ranges from 10% to 14%. Suitable substrates include carpet fibers, gypsum, concrete, bricks, etc.

Mold spores are everywhere all the time, entering from outdoor air as well as on pets and clothing. A mold spore landing on an indoor surface is likely to be insignificant and amount to little more than a common component of indoor dust, until such a mold spore lands on a moist organic surface (such as drywall.) High indoor humidity causes the surface moisture level to be sufficient for mold sporulation.  Since a mold spore requires moisture to propagate and grow, the indoor humidity level is a key gating factor in the control of indoor mold (and dust mites) in buildings.

Certain common mold genera and species, such as some members of the Aspergillus sp. and others grow readily on common building materials if they also have enough moisture. While there are fungal species that are able to grow under a remarkably wide range of environmental conditions, keeping indoor humidity at the appropriate level will reduce the chances of growth of the most common indoor problem molds.

High indoor humidity can encourage more issues than indoor mold. The same moisture conditions that support growth of problematic indoor molds also encourage the development of bacterial hazards, dust mite populations, mite fecal allergen problem, and possibly other insect problems in buildings.

The same measures of humidity control to prevent mold growth are needed to discourage the dust mite population that exists in all living areas. Measures including choosing and maintaining the proper humidity level to avoid indoor mold will also work to minimize the level of dust mites and dust mite allergens.

Keep the indoor humidity level in the mid-comfort range. A maximum indoor relative humidity of 50% RH may be acceptable, 45% RH better. At 60% indoor RH, we're entering the indoor mold-formation risk zone of high interior moisture in building wall or ceiling cavities or on wall and floor surfaces, possibly conducive to mold growth.


John Lapotaire, CIEC
Florida Indoor Air Quality Solutions
www.FloridaIAQ.com


Add a Comment

(Enter the numbers shown in the above image)


Follow jlapotaire on Twitter


Review microshield-es.com on alexa.com
   

[Valid RSS]
Add this Content to Your Site
   


Latest Top (12) News


EPISODE 542: Eugene C. Cole, DrPH – Research to Practice: Water Damage, Sewage, Mold & Public Health
This week we look forward to our interview with Eugene C. Cole DrPH. Dr. Gene Cole is Director of Research for LRC Indoor Testing & Research, Cary, NC; and formerly Professor of Environmental Health Sciences at Brigham Young University, Provo, UT. He has 35 years of research experience, with a primary focus on the ecology of indoor and work environments, with special emphasis on identification and reduction of pollutant reservoirs and sources, bioaerosols, human exposure assessment and control, product evaluation, cleaning and restoration, mold and sewage remediation, and biocides. Since 2000, he has continued to conduct research on the relationship between the use of antibacterial cleaning and hygiene products in the home, and antibiotic resistance; as well as on the effectiveness of cleaning to reduce the transmission of disease agents in schools. He has also worked with national and international organizations to address environmental health and infectious disease concerns such as medical waste management in Central Europe and South East Asia, hygiene promotion in Africa, and healthy homes and buildings in the U.S. and Asia. Dr. Cole is a member of the Scientific Advisory Council of the Cleaning Industry Research Institute (CIRI), and a Fellow of the American Industrial Hygiene Association. He holds a Master of Science in Public Health Microbiology and a Doctor of Public Health in Biohazard Science and Occupational Health, both from the University of North Carolina at Chapel Hill.

Thu, 11 Apr 2019 13:00:00 -0400


EPISODE 541: Jim Harris, Sr. – Chairman & Founder Concepts4 & Janitronics Co-founder & Chairman of CIRI – Cleaning, Success & Science
This week we look forward to our interview with Jim Harris, Sr., a consultant, trainer, corporate executive, and entrepreneur. Jim has had a productive and successful career in the cleaning industry for 45 years. Jim started Janitronics Facility Services in 1972 as a local cleaning service. The company has since evolved into a seven branch, comprehensive cleaning, maintenance and management service, but has a new approach: Thinking small; they specialize in creating, and sustaining a healthy indoor environment utilizing state of the art, effective ‘cleaning systems’ based on validated cleaning science research. Mr. Harris is also co-founder and chairman of the Cleaning Industry Research Institute (CIRI). CIRI is the clearinghouse for unbiased, peer-reviewed technical information and research about the science of cleaning or restoration of the indoor environment. Jim Harris has done what others have only dreamed of while building a profitable company. His company was built first and foremost on the science of cleaning. The company uses state-of-the-art equipment and processes to clean for health. To increase productivity, Janitronics developed its’ SysteamCleaning (TM) concept, utilizing state of the art workflow based on systems thinking and high performance standards. In 2000 the leadership of the company completed a succession transition to Jim Harris, Jr. and is headquartered in Albany, N.Y. They are not just dumping wastebaskets and cleaning restrooms. They pride themselves on cleaning a work environment to maintain a high health standard; focused on properly removing bio-contaminants and airborne particles. Janitronics has been successful in transforming cleaning into a science.

Fri, 05 Apr 2019 16:56:00 -0400


EPISODE 541: Jim Harris, Sr. – Chairman & Founder Concepts4 & Janitronics Co-founder & Chairman of CIRI – Cleaning, Success & Science
This week we look forward to our interview with Jim Harris, Sr., a consultant, trainer, corporate executive, and entrepreneur. Jim has had a productive and successful career in the cleaning industry for 45 years. Jim started Janitronics Facility Services in 1972 as a local cleaning service. The company has since evolved into a seven branch, comprehensive cleaning, maintenance and management service, but has a new approach: Thinking small; they specialize in creating, and sustaining a healthy indoor environment utilizing state of the art, effective ‘cleaning systems’ based on validated cleaning science research. Mr. Harris is also co-founder and chairman of the Cleaning Industry Research Institute (CIRI). CIRI is the clearinghouse for unbiased, peer-reviewed technical information and research about the science of cleaning or restoration of the indoor environment. Jim Harris has done what others have only dreamed of while building a profitable company. His company was built first and foremost on the science of cleaning. The company uses state-of-the-art equipment and processes to clean for health. To increase productivity, Janitronics developed its’ SysteamCleaning (TM) concept, utilizing state of the art workflow based on systems thinking and high performance standards. In 2000 the leadership of the company completed a succession transition to Jim Harris, Jr. and is headquartered in Albany, N.Y. They are not just dumping wastebaskets and cleaning restrooms. They pride themselves on cleaning a work environment to maintain a high health standard; focused on properly removing bio-contaminants and airborne particles. Janitronics has been successful in transforming cleaning into a science.

Fri, 05 Apr 2019 16:56:00 -0400


EPISODE 540: Rachel Adams, PhD – Research Scientist at UC Berkeley & California Department of Public Health Research to Practice – Moisture Measurement and Mold
This week we look forward to another Research to Practice presentation from one of the leading IAQ researchers in the world Rachel Adams, PhD. Dr. Adams is a microbiologist with a deep curiosity for how microbes work and how microbial interactions shape the environment around them, including our homes and our health. She is a Microbiologist with the California Department of Public Health and a Project Scientist at the University of California, Berkeley, in the Department of Plant & Microbial Biology. Dr. Adams has expertise in using sequence-based technology to study microbial exposures in indoor environments, has developed methods to improve the identification of microbes, and has interest in understanding the consequences of indoor microbial exposures on human health. Dr. Adams holds a B.S. from Georgetown University and a Ph.D. from Stanford University and is a member of the Mycological Society of America and the International Society of Indoor Air Quality and Climate (ISIAQ).

Fri, 29 Mar 2019 16:54:00 -0400


EPISODE 539: Christine Oliver, M.D. – Massachusetts General Hospital Boston, MA – Odors, Multiple Chemical Sensitivities and More an MD’s Perspective (Flashback Friday: Original Air Date 4-7-2017 | Episode 455)
This week we Flashback to one of our more popular shows with Christine Oliver, MD. Dr. Oliver joined us to discuss Odors and Chemical Sensitivities about 2 years ago. This was prior to our first YouTube videos so we are going to add some graphics and photos this week. Dr. Oliver is President of Occupational Health Initiatives, Inc. in Brookline, MA. She is an Associate Physician in the Department of Medicine (Pulmonary and Critical Care Division) at the Massachusetts General Hospital (MGH) and Associate Clinical Professor of Medicine at Harvard Medical School in Boston. Board certified in occupational medicine and in internal medicine. Dr. Oliver’s primary specialty is Occupational and Environmental Medicine, with an emphasis on occupational and environmental lung disease. At the MGH she evaluates and cares for patients with occupational and environmental illness and disease, including occupational asthma, interstitial lung disease, building-related health problems, and chemical sensitivities. Dr. Oliver has done research and published in the area of occupational lung disease and she has testified before the United States Congress with regard to work-related health issues and risks. For the past three decades an important focus of Dr. Oliver’s consulting work has been indoor air quality and related health effects. She has lectured and published on this subject and she has been actively involved in indoor air quality assessments in a variety of settings. These include health care facilities, courthouses and other government buildings, schools, and commercial office buildings. Together with industrial hygienists, engineers, and human systems specialists she has worked to identify, characterize, and resolve air quality problems and their related health effects. In 2009 she was a participant and presenter in the ASTM Johnson Conference on the standardization of mold response procedures. An important component of Dr. Oliver’s clinical work has been in the area of fragrances and their related health effects, including causation and/or exacerbation of chemical sensitivities. She has lectured on these topics, counseled patients and their families with regard to steps that can be taken to identify and remove fragranced products from their environment, and advocated for a fragrance-free policy in the clinic in which she works.

Fri, 22 Mar 2019 16:52:00 -0400


EPISODE 538: Ritchie Shoemaker, M.D. – Part 2 of our series with the Mold Warrior (Flashback Friday: Original Air Date 5-2-2008)
Radio Joe is on the road this week. On Iaqradio+ we will Flashback to Part 2 of our original series with Ritchie Shoemaker, MD. We will review key points from week one and get into more detail about Dr. Shoemakers research on sick building syndrome and water damaged buildings plus information on treatment options for patients and answers to questions sent in by our listeners.

Fri, 15 Mar 2019 16:50:00 -0400


EPISODE 537: Parham Azimi, PhD – Research Associate Illinois Institute of Technology – New Research on Particulate Matter & Mortality
This week we welcome Parham Azimi, PhD to Iaqradio+. Dr Azimi is a research associate in the Department of Civil, Architectural and Environmental Engineering at Illinois Institute of Technology. Much of his research work has focused on fate, transport, and control of indoor aerosols of indoor and ambient origin, chronic health impacts of fine particles in various microenvironments, and energy performance of residential and commercial buildings. Parham is a member of ASHRAE Technical Committee 2.4, UL 2904 Standard Technical Panel, International Society for Indoor Air Quality and Climate (ISIAQ) and American Association for Aerosol Research (AAAR). Dr. Azimi’s work came to our attention recently when we were sent a copy of a recent paper he worked on with Brent Stephens, PhD called “A framework for estimating the US mortality burden of fine particulate matter exposure attributable to indoor and outdoor microenvironments”. Dr. Stephens joined us on March 13, 2015 for a great show on The Intersection of Building Science, Energy Efficiency & IAQ.

Fri, 08 Mar 2019 16:46:00 -0500


EPISODE 536 - Ritchie Shoemaker, M.D. – Part 1 of our series with the Mold Warrior (Flashback Friday: Original Air Date 4-25-2008)
Dr. Ritchie Shoemaker first joined Iaqradio as a guest back in April of 2008. Since then we have welcomed him back once a year or so to update us on his research into Chronic Inflammatory Response Syndrome (CIRS). Today we are going to replay our first show with Dr. Shoemaker and we hope to have him join us again soon for another update. Following his bio we have listed all our shows with him over the years. Ritchie Shoemaker, M. D., is a recognized leader in patient care, research and education pioneer in the field of biotoxin related illness. While illness acquired following exposure to the interior environment of water-damaged buildings (WDB) comprises the bulk of Shoemaker’s daily practice, other illnesses caused by exposure to biologically produced toxins are quite similar in their “final common pathway.” What this means is that while the illness might begin acutely with exposure to fungi, spirochetes, apicomplexans, dinoflagellates and cyanobacteria, for example, in its chronic form, each of these illnesses has similar symptoms, lab findings, and Visual Contrast Sensitivity findings. Taken together the inflammatory illness from each of these diverse sources is known as a Chronic Inflammatory Response Syndrome. We do not have a blog for Dr. Shoemakers first few shows. He joined us before Cliff started doing a weekly blog. It may take a few time listening to make sense of everything he is proposing. It was very helpful when he sent me the Bio-toxin Pathway chart to follow. Print this out and have it handy while listening to his shows and it will help you immensely.

Fri, 01 Mar 2019 16:43:00 -0500


EPISODE 535: Oliver Threlfall - CEO Steamatic of Australia - A Unique Perspective on how the Global Restoration Big Dogs Play!
Over the past 30 years Oliver Threlfall has been totally dedicated to the cleaning and restoration industry. He studied biology at Deakin University- before commencing Steamatic in Melbourne, Victoria in 1986. He then completed IICRC (The Institute of Inspection, Cleaning and Restoration Certification) training in various modules and in addition took Microbial and Bioaerosol remediation training under the guidance of Dr. Tullis and Dr. Thulman of Duke University. Steamatic was formed in Australia in 1986 following requests from underwriters to establish proven claims reduction services that had been demonstrated overseas. They then transformed an established cleaning company into a specialist cleaning technologies firm. Oliver is the Steamatic of Australia CEO which makes him a very busy and connected man "down under".

Thu, 21 Feb 2019 15:21:00 -0500


EPISODE 534: Corbett Lunsford - The Home Performance Worskshop & The Worlds Highest Performance Tiny House on Wheels!
Corbett Lunsford, wasn't a home performance expert- he used to play piano for ballerinas. In 2008, he learned a few things very quickly: construction is unbelievably messy, most pros are over-rushed and under-paid, and homeowners end up suffering in small ways, for their entire lives in a house. None of this has to be so- we can opt out of the whole thing with performance testing. His goal is to package building performance so it can easily be understood and used by professionals and consumers alike, for better buildings worldwide. In 2009, he started teaching pros through the Building Performance Workshop and he has hosted over 300 YouTube videos and 80 interviews for the Building Performance Podcast. He also wrote the book Home Performance Diagnostics: the Guide to Advanced Testing, and developed the APT Reports software tool. In 2016 he and his wife Grace built the world's highest performance tiny house on wheels, the #TinyLab, and toured the US before settling down in Atlanta, Georgia. Along the way, they created the first TV series about home performance, Home Diagnosis, which airs on public TV across the U.S. Corbett, Grace, and their new baby went on a 13,000 mile, 34-city U.S. Tour from April 2016-January 2017 in the world's highest performance tiny house on wheels, the #TinyLab. Their mission was simple: to revolutionize the home market by teaching consumers and contractors alike to use scientific testing to prove the work gets done to quality standards. Each city on the Proof Is Possible Tour was sponsored by a local company that shared the passion for empowering homeowners and changing the game. Along the way certain cities shared in filming of the couple's TV show Home Diagnosis. They invited over 7,000 strangers into their home on the tour, and now live in Atlanta, Georgia.

Thu, 14 Feb 2019 15:32:00 -0500


EPISODE 533: Open Mic - Topics for this week include: Current Events, Certification, Standards, Training, Networking & Resources
Today we are going to try something new and if it works we will make it a regular part of the line up. We are going to throw out some topics, invite a few friends and have a discussion about IAQ, disaster restoration and building science. We also encourage listeners to text in your questions or comments. Today we expect to hear from Jay Stake, Eric Shapiro, Carl Grimes, John Downey and Pete Consigli. The topics we will throw out for discussion will come from the list in this week’s show title. We have some of the leaders of the industry join us every week so lets take advantage of that and start a conversation.

Thu, 07 Feb 2019 15:56:00 -0500


EPISODE 533: Open Mic - Topics for this week include: Current Events, Certification, Standards, Training, Networking & Resources
Today we are going to try something new and if it works we will make it a regular part of the line up. We are going to throw out some topics, invite a few friends and have a discussion about IAQ, disaster restoration and building science. We also encourage listeners to text in your questions or comments. Today we expect to hear from Jay Stake, Eric Shapiro, Carl Grimes, John Downey and Pete Consigli. The topics we will throw out for discussion will come from the list in this week’s show title. We have some of the leaders of the industry join us every week so lets take advantage of that and start a conversation.

Thu, 07 Feb 2019 15:56:00 -0500
Follow Microshields IAQ News and Headlines Bloglines RSS Feed

Subscribe with Bloglines

 



IAQ News and Articles

Latest Top (10) News
http://recordings.talkshoe.com/rss1547.xml