Indoor Air Quality Solutions Blog

"Healthier Air Starts Here" (407) 383-9459


Indoor Air Quality IAQ Blog





What is a Mold Assessment?

I once again raise this question because I’ve been called in to provide yet another second opinion of a mold inspection that consisted of nothing more than the collection of a few air samples for mold spores.  I assure you that a correct mold assessment in accordance with the only industry standard of practice does not involve the random sampling of mold.  The only industry standard of practice is the ASTM D-7338 Assessment of Fungal Growth in Buildings.


The question of just what is a mold assessment is a frustrating and surprisingly hard question for many industry professionals to answer.  That’s right; many mold professionals just don’t know their own industry well enough to know the prevailing standard of practice.  When I’m asked to provide a second opinion on a mold inspection, I always want to talk with the original mold assessors.  Given the chance, I will always take the opportunity to try to raise the awareness of the original mold assessor and inform them of the ASTM D-7338 and the process of providing a valuable mold assessment and report.  I feel that this is best for our industry and for the consumer.


So just what is it that many mold assessors believe is a mold inspection?  Many believe that a mold assessment is simply testing for mold.  There is plenty of guidance on the value of mold sampling but if the ill-informed mold assessor isn’t aware of the industry standard of practice, the ASTM D-7338, there is little chance that they will be aware of the very public opinion of mold sampling.


Let’s just review the industry position on mold sampling.  Ten years ago, the ACGIH concluded that air testing provided a "snap shot" of conditions at the exact time and place of the sampling, but nothing more.   The Center for Disease Control, CDC's current position is that air sampling for mold is nothing more than a snap shot and that such a snap shot is not reliable, representative or worth the cost. The CDC states very clearly that “Any claim based solely on air sampling results is inherently suspect.”  The CDC goes on to state that “There is no reason to respond to questionable testing by conducting more of it.  I believe that is a very clear position from a reputable source. 


What does the laboratory say about the interpretation of the collected mold samples?

  • The client is solely responsible for the use and interpretation
  • Note: Interpretation is left to the company and/or persons who conducted the field work.
  • The “Lab” shall have no liability to the client or the client's customer with respect to decisions or recommendations made, actions taken or courses of conduct implemented by either the client or the client's customer as a result of or based upon the Test Results.

 

The mold assessor that collected the mold samples is the laboratory’s client not the property owner.  That is something that the mold sampler seems to not understand.


Let’s look a bit further. When the following governmental and industry organizations were asked if mold testing is necessary, this is what they had to say.

  • American Industrial Hygiene Association, AIHA There are no standards for “acceptable” levels of mold in the indoor environment. If you know you have a mold problem, it is more important to spend time and resources solving the moisture problem and getting rid of the mold than to spend it on sampling. 
  • US Environmental Protection Agency, EPA If you know you have a mold problem, it is more important to spend time and resources solving the moisture problem and getting rid of the mold than to spend it on sampling. If visible mold growth is present, sampling is unnecessary.  Since no EPA or other federal limits have been set for mold or mold spores, sampling cannot be used to check a building's compliance with federal mold standards.
  • Occupational Health and Safety Administration, OSHA In most cases, if visible mold growth is present, sampling is unnecessary. Your first step should be to inspect for any evidence of water damage and visible mold growth.
  • U.S. Department of Labor There are no standards for acceptable levels of mold in buildings, and the lack of a definitive correlation between exposure levels and health effects makes interpreting the data difficult, if not impossible.
  • Center for Disease Control, CDC There are no accepted standards for mold sampling in indoor environments or for analyzing and interpreting the data in terms of human health.  Molds are ubiquitous in the environment, and can be found almost anywhere samples are taken.  It is not known, however, what quantity of mold is acceptable in indoor environments with respect to health.  CDC does not recommend routine sampling for molds. Generally, it is not necessary to identify the species of mold growing in a building.  Measurements of mold in air are not reliable or representative.  If mold is seen or smelled, there is a potential health risk; therefore, no matter what type of mold is present, you should arrange for its removal.
  • The Florida Department of Health, The Florida Department of Health does not recommend mold testing or sampling to see if you have a mold problem, or to see what kind of mold might be growing.
  • NYC Guidelines on Assessment and Remediation of Fungi in Indoor Environments, The Department of Health, DOH, should continue to emphasize in its public education materials that sampling for airborne mold is unlikely to provide reliable information for decision-making in damp or moldy buildings.

 

So, should you sample for mold? No, never for the purpose of mold investigation.  Why? There are too many variables impacting the results and the sample size is too small for air testing for mold to be reliable.  The type of mold will not change the necessary mold remediation.  The genus of mold is just not relevant or necessary unless you are trying to frighten a client into believing that they have “Toxic” mold.  Mold spore trap air samples do not have the ability to establish the presence of any mycotoxins.  Air sampling's lack of utility in determining the level of mold found in indoor air may be a surprise to some, given the frequent references to these tests and mold litigation.  


Unfortunately, those that reference mold testing in mold litigation are never directly involved in mold litigation or they would know what the reality is, mold sampling to the genus level is worthless in court.


Mold assessors should bear in mind that samples provide information about a site as it existed at the time tested.  However, the findings may not represent conditions at a time in the past or future, even the relatively recent past or near future. Changes in the kinds, concentrations, and proportions of biological agents in the air can be rapid and substantial.  Bioaerosols: Assessment and Control, Section 2.4.2.2.


ASTM D7338 Standard Guide for Assessment of Fungal Growth in Buildings 7.1 The most important requirement of an assessment for fungal growth is an on-site inspection of the subject building. It is very important to remember that the ASTM D-7338 is the only recognized standard for mold assessment.  According to the ASTM D-7338 the parts of a mold assessment include:

  • the collection of background information,
  • the formulation of a hypothesis or hypotheses,
  • on-site inspection including moisture dynamics,
  • an evaluation of the HVAC system,
  • hypothesis testing,
  • site documentation and written report.

 

The scope of work defines the problem and, just as importantly, which part of the basic assessment and which of the procedures are to be performed.   The scope of work will define the inspection boundaries.  The ASTM D-7338 clearly states that “Within the inspection boundary, all surfaces should be inspected to the extent feasible, including

  • above suspended ceilings and
  • inside pipe chases,
  • attics, and
  • crawlspaces.

The exterior of the building and adjacent grounds should also be inspected for moisture intrusion sites and air leaks.”


The mold inspector that only samples for mold and provides nothing more than a laboratory report will attempt to exclude virtually all areas of a building from his responsibility.  Below is an excerpt from a peer reviewed mold inspection report “Disclaimer”.  It is a remarkable example of how some mold inspectors attempt to alleviate themselves form the responsibility of the very job that they were hired to perform.

DISCLAIMER

"Certain areas are considered inaccessible and impractical to inspect including, but not limited to,

the interiors of walls and inaccessible areas below; areas beneath wood floors over concrete; areas concealed by floor coverings; and areas to which there is no access without defacing or tearing out lumber, masonry, roofing or finished workmanship; structures; portions of the attic concealed or made inaccessible by insulation, belongings, equipment or ducting; portions of the attic or roof cavity concealed due to inadequate crawl space; areas of the attic or crawl space made inaccessible due to construction; interiors of enclosed boxed eaves; portions of the sub area concealed or made inaccessible by ducting or insulation; enclosed bay windows; portions of the interior made inaccessible by furnishings; areas where locks prevented access; areas concealed by appliances; areas concealed by stored materials; and areas concealed by heavy vegetation.

There is no economically practical method to make these areas accessible. However, they may be subject to attack by microbial organisms. No opinion is rendered concerning the conditions in these aforementioned or other inaccessible areas. Furthermore, mold grows. As such, the inspection and report produced by Mold Assessor is not a guarantee that mold does not exist.

As a courtesy Mold Assessor may point out conditions that contribute to mold growth but such comments are not part of the bargained for report, protocol, or supplemental information. The protocol is not intended to be either exhaustive or inclusive of all pertinent requirements, methods or procedures that might be appropriate on a particular mold remediation project.

Anyone using this document should understand the limitations with its use, and rely on his or her own independent judgment, or as appropriate, seek the advice of competent professionals in determining the exercise of reasonable care in any given situation."


This type of disclaimer is an example of how some mold inspectors are intent on limiting their area of responsibility.  What exactly are property owners that hire this mold inspector paying for?  What exactly is the value provided by the mold assessor?  Most importantly, why the need to limit the area of responsibility in direct contradiction to the ASTM D-7338?  The answer is that this mold assessor, like many, had no idea that the ASTM D-7338 even existed. This mold assessor, like many, felt that the simple collection of air samples for mold was a mold inspection in direct contradiction to the government and industry positions sited above.


As with any industry the mold industry has a standard of practice that must be followed to provide a property owner with necessary and relevant information regarding any possible mold issue within their property.  Mold sampling will never have the ability to provide any of that necessary and relevant information


A mold inspection in accordance with the ASTM D-7338 will provide the property owner with a wealth of necessary and relevant information.


The ASTM D-7338 states in Section 7.5.3 Identification of Current Water Damage and Suspect Fungal Growth

All surfaces within the inspection boundary should be systematically evaluated for indicators of moisture damage and fungal growth.

Exposed surfaces (including building materials, furnishings, and contents) should be examined for past and ongoing damage including:

(1)  suspect fungal growth,

(2)  standing water

(3)  water stains,

(4)  dampness to touch, and

(5)  blistering, warping, de-lamination, or other deterioration.


The ASTM D-7338 states in Section 7.5.4 Identification of Potentials for Fungal Growth

The inspection should identify moisture sources and moisture pathways, including:

(1)  sites where condensation may occur,

(2)  equipment or activities which may release water,

(3)  pathways for water movement and

(4)  areas where leakage is likely.

   -  Staining patterns are often useful in identifying moisture sources.


The ASTM D-7338 states in Section 7.5.5 Presence of Odors

Detection of musty odors should always be noted.

(1)  Sources of such odors should be located.

(2)  If the source is not apparent, intrusive investigation may be required.


The ASTM D-7338 states in Section 7.5.6 Classification of Inspection Observations

Classify each distinct area or area of interest within the inspection boundary as one of the following categories:

(1)  no apparent fungal growth and no apparent water damage;

(2)  water damage having no visually suspect or confirmed fungal growth,

(3)  visually suspect or confirmed fungal growth having no apparent water damage, &

(4)  water damage having visually suspect or confirmed fungal growth.


The ASTM D-7338 states in Section 7.5.8 HVAC Inspection, if applicable per the scope of work

The interiors of HVAC equipment in contact with ventilation air should be inspected for indicators of excessive moisture or suspect fungal growth.

Such areas may include intake and return plenums, filters, coils, condensate pans, fans, housing insulation, and supply ducts immediately downstream from the coils.


The ASTM D-7338 states in Section 7.6.1 Site Map—A site/floor plan should be prepared showing each inspection classification, as determined in 7.5.6.

The plan should be sufficiently detailed to allow each area of interest to the assessment to be unambiguously located.


The ASTM D-7338 states in Section 7.6.2 Documentation of Suspect Fungal Growth—Wherever suspect or confirmed fungal growth is identified during the inspection, documentation should include:

(1)  extent (for example, approximate square footage of suspect growth),

(2) severity (for example, relative darkness or continuity of stain), growth pattern (for example, light versus heavy growth and spotty versus continuous growth), and

(3)  clues to apparent cause (for example, exterior wall, condensation near a HVAC vent, associated with water staining).


The ASTM D-7338 states in Section 7.6.3 Documentation of Moisture Damage—In addition to documenting the location of moisture damage, as above, further documentation should include:

(1)  apparent sources of leaks and other moisture sources, and

(2)  apparent timing and duration (for example, whether the moisture has been resolved, active (currently wet) or the moisture source is likely to reoccur


The ASTM D-7338 states in Section 7.6.4 Visual Documentation—Photographs or videotapes are often helpful in documenting building conditions. Captions should note location, timing, and context.


The ASTM D-7338 states in Section 7.6.5 Additional Detail—Start and stop time, temperature, humidity, occupancy, condition, and housekeeping of the property.


With a clearly written standard of practice for mold assessment, it’s truly hard to believe that there are so many mold assessors that provide a client little more than a few air samples for mold and call it a mold inspection.  Worse yet is when these mold inspectors call the simple collection of air samples for mold air quality samples.  Both are perfect examples of over selling and under delivering.


More importantly, I would stress that a mold assessment is NOT the collection of mold samples or testing for mold.  It may include the collection of mold samples but the collection of mold samples is NOT, on its own, a mold assessment.


If you hire a licensed mold assessor you should receive a written report in accordance with the ASTM D-7338 signed by the licensed mold assessor that performed the assessment.  Not by someone in another location that never visited your home or office.  When you hire a licensed mold assessor you should receive the written report signed by the licensed mold assessor that performed the assessment and never be required to pay an additional fee for a written report.   


That’s ridicules, what are you paying for if you aren’t receiving a written mold assessment report from your licensed assessor.


So what should the written mold assessment report include?


As the ASTM D-7338 clearly states.  A detailed evaluation of data obtained from a building history and inspection to formulate an initial hypothesis about the

  • origin,
  • identity, location,
  • and extent of amplification of mold growth

 

The written report can then be provided to licensed mold remediators that can then provide you with a written estimate for the remediation.


Finally, I close with questions you should ask your mold assessor before you hire them.

 

 

 

 

John P. Lapotaire, CIEC

Certified Indoor Environmental Consultant

Indoor Air Quality Solutions, IAQS

Microshield Environmental Services, LLC

 




Add a Comment

(Enter the numbers shown in the above image)


Follow jlapotaire on Twitter


Review microshield-es.com on alexa.com
   

[Valid RSS]
Add this Content to Your Site
   


Latest Top (12) News


EPISODE473 - FLASHBACK Claude Blackburn -Founder Dri-Eaz Products
Today on IAQ Radio we bring out of the archival vault the Z-mans favorite episode from 8-13-2010, Episode 177 with Claude Blackburn. We are calling this one "From humble beginning to raging success, a candid conversation with the Dri-Eaz Products Founder". Radio Joe and the Z-man will be back live next week but do not miss this classic. Claude Blackburn became involved in the cleaning and restoration industry in 1972. Through a combination of courage, determination, hard work and creativity he founded and built Dri-Eaz Products (based in Burlington, Washington) into a business and brand recognized globally as a leader in structural drying. When Claude sold Dri-Eaz in 2006 it had almost 200 employees, 150 distributors and sales of 50 million. LEARN MORE about this remarkable man and how he built his company this week on IAQ Radio!

Fri, 18 Aug 2017 12:00:16 -0400


EPISODE472 - FLASHBACK FRIDAY - Jeffrey Siegel Ph.D.
Dr. Jeff Siegel is an Associate Professor in the Department of Civil Engineering and the Dalla Lana School of Public Health at The University of Toronto. Prior to accepting his current position he was an Associate Professor at the University of Texas, Austin. His interests and research have focused on healthy and sustainable buildings, ventilation and indoor air quality in residential and commercial buildings, control of indoor particulate matter, secondary impacts of control technologies and strategies, aerosol dynamics in indoor environments and HVAC systems. He is also keenly interested in ensuring that good research works its way into practice and this week we want to focus on that theme. Dr. Siegel's Ph.D. is in Mechanical Engineering (2002) from the University of California, Berkeley, he also has an M.S. in Mechanical Engineering (1999) from the same institution and a B.S. in Engineering (1995) from Swarthmore College. He is a prolific researcher and speaker and a very active member of professionals societies and associations including ISIAQ and ASHRAE.

Fri, 11 Aug 2017 12:00:35 -0400


EPISODE471 - FLASHBACK FRIDAY - In Memoriam Larry Robertson
This week we go back in the archives to a few shows we did with an IAQ and Mold pioneer Larry Robertson. Larry joined us twice over the years and Radio Joe has gone back through those shows to put together a highlight real. LEARN MORE this week on IAQ Radio! Larry Robertson, the Indoor Air Quality Association's 1st President and founding Board Member. Mr. Robertson was a leader in IAQ research and services for over 3 decades. He is known for establishing Mycotech Biological, Inc. (MBI), one of the first environmental laboratories that specialized in the identification of fungi associated with HVAC systems. He also contributed in the initial development of the CIE and CMR certification programs and served on the Texas Mold Task Force relative to the development of mold regulations in the State of Texas. Larry published many papers in peer reviewed journals along with a mountain of other papers, articles and presentations. He was a prolific volunteer to industry associations and received numerous special recognition's and awards.

Fri, 04 Aug 2017 12:00:41 -0400


EPISODE470 - Andrew Streifel -Environmental Infection Control
This week on IAQ Radio we welcome Andrew Streifel. Andrew J. Streifel is a Hospital Environment Specialist with the Department of Environmental Health & Safety at the University of Minnesota. Whenever there is a high profile hospital acquired infection one of the first names that comes to mind is Andy Streifel. Mr. Streifel has been involved in the investigation of over 80 clusters of infection related to hospital air quality. He has served as a consultant in over 400 hospitals worldwide on a variety of indoor air quality issues, water microbial contamination and has investigated clusters of bacterial infections due to unsanitary clinical practice. His current research interests involve energy management impact on infection prevention and validation of the air and water safety in healthcare facilities. Andy is a registered Environmental Health Specialist in Minnesota. He currently serves as an invited nonvoting member on the Maintenance Committee for the SSPC 170: ASHRAE Standard for Ventilation of Health Care Facilities 2008 - present. Mr. Streifel is also serving on the revision committee for the 2014 edition of the FGI Guidelines for Design and Construction of Health Care Facilities. He has served on this committee since 1994 and has participated in the development of the 1996, 2001, and 2006, 2010, 2014 & 2018 editions. In addition Mr. Streifel has served on the Special Project committee that authored the HVAC Design Manual for Hospitals and Clinics. He was an author on ASHRAE published articles on Ventilation for the Protection of Immune Compromised Patients-1988, Construction Impact on Indoor Air Quality-1995 and Air Leakage Analysis of Special Ventilation Hospital Rooms-2008. Mr. Streifel has assisted University of Minnesota Institute of Technology & School of Public Health as technical advisor on filtration, patient room airflow studies and particle management projects. He also serves on the National Air Duct Cleaners Association Standards Committee. In addition, he is an author in over 50 articles, published in the academic and professional journals, related to ventilation and water quality in health care.

Fri, 28 Jul 2017 12:00:46 -0400


EPISODE469 -Kristy & Justin Sifford -Listen Better, Plan Better, Hire Bett
This week on IAQ Radio we welcome two people with a rare combination of credentials in the industry. Kristy and Justin Sifford both have extensive experience in the construction and flooring industry and are also experienced professionals on hiring, promoting and retaining employees along with other business operations issues. Just about every business has to wrestle with employment issues and very few business owners are also experts in hiring and recruitment of employees. Some will hire a company like Wylander and others will learn as much about the process as possible and do it themselves. Whatever your style you will learn more during this show. Kristy Sifford founded the company after years of flooring industry experience that included an excellent track record of finding and placing top talent in both flooring and restoration positions. She is a highly successful matchmaker in this business. Kristy started working in her family owned flooring store in college, and grew to develop a flooring company, which was part of a large Disaster Restoration and Carpet Cleaning Company in the Dallas/Fort Worth area. In addition to recruiting, she has worked with many clients in the flooring industry on process improvement and handling remote accounting for flooring companies. Justin Sifford worked in the flooring industry for over 20 years and the restoration industry for over a decade. Having owned flooring companies in the past he has a unique perspective that allows him to appreciate the struggles his clients have owning a business and employing and keeping top talent. He previously worked as the Vice President of Operations for a company that offered consulting and recruiting services to the flooring and restoration industries. He worked with a wide range of companies, from companies as small as $500,000 up to $20 million. He was able to successfully streamline processes for other companies, identify KPI's, and was the chief architect in the growth of our own company

Fri, 21 Jul 2017 11:59:59 -0400


EPISODE468 - Flashback Friday - Joseph Ponessa, PhD, MS
Radio Joe and the Zman are on their summer hiatus, returning next week live. This week we are going to flashback to a show from 12-3-2010 with Joe Ponessa, PhD who at the time had recently retired from Rutgers Cooperative Extension after serving 25 years as the Housing, Indoor Environment and Health Specialist. In that position, he worked on curriculum development and outreach education, serving both lay and professional audiences. Areas of specialization included the indoor environment and its impact on health; management of building moisture problems and building science/construction technology. Dr. Ponessa has consulted for The Department of Housing and Urban Development and the Centers for Disease Control on Housing-Environmental Health issues. He also taught a course in Building Science Moisture Management Principles for New Jersey Building Code Officials and architects.

Fri, 14 Jul 2017 12:00:15 -0400


EPISODE467 - Flashback Friday - Major L. Long - Fire Restoration Pioneer
Join us as we go back in time and discuss the early days of the disaster restoration field with industry pioneer Major Long. Major was one of the first disaster restoration practitioners. Major Long, CR is a past president of the RIA (1978-1980) and also served a term as the association's disaster restoration technical director. Don't miss this opportunity to hear from one of the early innovators in the field of disaster restoration field.

Fri, 07 Jul 2017 12:00:06 -0400


EPISODE466 - Flashback Friday to episode 456
Pete Consigli, CR, WLS; Ken Larsen, CR, WLS, CMP ; Peter Crosa, AIC, RPA and Ed Cross, Esq â??Restoration Contractors of the Future: Will they Get a Spine or be Rolled Over?â??

Fri, 30 Jun 2017 12:00:37 -0400


EPISODE465 - Nuno Canha, PhD - University of Lisbon - IAQ and Ventilation
This week on IAQ Radio we welcome another international researcher from the University of Lisbon Nuno Canha, PhD. Dr. Canha recently published a paper "Indoor air quality during sleep under different ventilation patterns". This is a topic we have been interested in but there has not been much research to discuss. We look forward to talking about this paper and and other research Dr. Canha has done related to IAQ issues. Dr. Canha holds a MSc in Chemistry from Instituto Superior Tecnico of University of Lisbon, Portugal, and completed a PhD degree in Environmental Sciences in Delft University of Technology (Delft, The Netherlands) in 2014. His main research interests are instrumental neutron activation analysis, indoor air quality, source apportionment, ventilation rates, atmospheric air quality, exposure to air pollutants and biomonitoring of air pollution with lichens. Join us live today at noon or download the show later to LEARN MORE on IAQ Radio!

Fri, 23 Jun 2017 12:00:06 -0400


EPISODE464 - Live from the Violand Executive Summit!
We are back at the annual Violand Executive Summit and have lined up a great cast of restoration veterans and up and comers to discuss the topic "Restoration a Changing Industry". 2017 marks the 30th anniversary for Violand Management Associates, who during that time, has grown to become a leading Advisory Services firm in the restoration and cleaning industries. In the spirit of watching a company like Violand Management grow and develop over three decades, we thought it would be fun to explore how the restoration industry itself has changed during that time, sometimes for the good and sometimes for the not so good. We also plan to explore what this group feels are the potential future opportunities and where the industry is going. To help us do that, we have asked a group of Violand Executive Summit participants to help us out and have assembled a talented group of industry veterans and savvy rising stars in restoration. It's great to be back at the Violand Executive Summit! The Veterans Lee King -President After Disaster and current RIA Board of Directors member Wes Williams - Founder and President CJB in the Vancouver BC Scott Stamper - CEO Regency DKI and past RIA president Tom Laska - President ICC Restoration Minneapolis, MN The Next Generation of Leaders Chris Yanker - Production Manager Buffalo Restoration in Bozeman, MT Jacelyn Carpenter - CEO Ideal Restoration, San Francisco, CA and RIA board member Grant Nitzche - President SERVPRO of Wheaton, IL Tom McMahon - Senior Project Manager McMahon Restoration Chicago, IL

Fri, 16 Jun 2017 12:00:14 -0400


EPISODE463 - Flashback Friday - Martin L. King, ASA, CR
This week we flashback to a show from 3-28-2008 with Martin L. King, ASA, CR. Unfortunately Mr. King is no longer with us but we feel blessed to have this interview with him. We have cleaned up some audio issues and are thrilled that this fantastic interview will live on many years to come. We are proud to have done this interview and plan on dedicating quite a few future Flashback Fridayâ??s to shows with industry leaders that are unfortunately no longer with us, this is the first in that series. Martin King, ASA, CR was the Restoration Industries Association Technical Adviser for 30 years, where he developed a broad range of restoration procedures and published over 300 articles in trade journals. As the CEO of Martin Churchill Associates, Inc. Damage Investigators and Appraisers Mr. King also investigated and prepared formal reports on over 2000 property damage cases. Marty also taught at the University of Maryland in the Fire Sciences group. Mr. King was the man disaster restoration people went to when nobody else could answer their questions. Donâ??t miss this rare opportunity to hear the â??Dean of Disaster Restorationâ??. Also joining us on this show was The â??Restoration Industries Global Watchdogâ?? Pete Consigli and our Technical Director, Dr. Dietrich Weyel.

Fri, 09 Jun 2017 11:59:45 -0400


EPISODE462 - Larry Zarker, CEO BPI & Joe Medosch, Independent Trainer
This week on IAQ Radio we explore a new credential from the home performance world that is directly related to indoor environmental quality. The Building Performance Institute, has recently established the Healthy Home Evaluator credential to add to their list of credentials available. We look forward to talking about this and other home performance community trends with Larry Zarker and Joe Medosch. Larry Zarker is the CEO of the Building Performance Institute, the professional standards setting and credentialing organization for both the weatherization and home performance contracting industries. He oversees BPI's national network of over 12,000 certified professionals and BPI GoldStar contracting companies. He helped found and served on the Board of Directors of Efficiency First, the trade association for America's home performance workforce. Prior to BPI, he worked for nearly twenty years with the NAHB Research Center and was the Vice President of Marketing for over a decade, serving both the new home and remodeling sectors with innovative product development and research. Joe Medosch - Owner of Energy & Environmental Consulting, LLC and Executive Director of Healthy Home Environment Association. He participated in the development of the BPI HHE credential and is a Healthy Homes Master Trainer. His certifications include: BPI Proctor - Building Analyst & Envelope Professional, Healthy Home Evaluator, Infiltration & Duct Leakage, ICC- Commercial & Residential Energy Inspector / Plans Examiner and Residential Building Inspector.

Fri, 02 Jun 2017 11:59:43 -0400
Follow Microshields IAQ News and Headlines Bloglines RSS Feed

Subscribe with Bloglines

 



IAQ News and Articles

Latest Top (10) News
http://recordings.talkshoe.com/rss1547.xml