Indoor Air Quality Solutions Blog

"Healthier Air Starts Here" (407) 383-9459




Indoor Air Quality IAQ Blog





Florida Mold Humidity Bloom

Florida Humidity Bloom Florida Indoor Air Quality SolutionsA humidity bloom is the growth of mold within a living space due to the elevation of indoor relative humidity at or above 60 percent relative humidity for a period of time greater than 72 hours and must be maintained for growth to continue. 

When the humidity is above 60 percent relative humidity, molds will germinate causing what is referred to as a mold bloom.   These molds can bloom in many colors and are often confused with dust, dirt, foxing, ghosting, or cobwebs.

Humidity for an extended period of time, typically in excess of 72 hours to initiate the bloom and must be maintained for growth to continue.  When the humidity is above 60 percent relative humidity, molds will germinate causing what is referred to as a mold bloom.   These molds can bloom in many colors and are often confused with dust, dirt, foxing, ghosting, or cobwebs.

Both active and inactive mold can have a distinctive smell, which most people describe as musty.

Active mold in the early stages of a bloom has hair-like filaments in webs, which develop a more bushy appearance as the bloom matures. This is more easily seen under magnification. Active mold is soft and may smear when touched with a fine brush. It may also be slimy and damp.  Inactive mold is dry and powdery and will seem to brush off materials readily.

Mold and mildew are words that refer to more than 100,000 species of fungi. Mold spores are present everywhere in our environment, generally in a dormant state where they do little damage. Spores require moisture to become active. They do not require light.

When water or high relative humidity provides the necessary moisture, dormant spores will germinate, grow fine web-like structures, and eventually produce fruiting bodies that release more spores. Most molds will germinate at 60 percent relative humidity. Increases in temperature can speed the growth rate of active mold.

There are 4 critical requirements for mold growth – available mold spores, available mold food, appropriate temperatures and considerable moisture. The removal of any one of these items will prohibit mold growth.

The only way to reduce the threat of mold in a home is to maintain an environment that is not hospitable for the germination of mold spores. The temperature should be 74-78 degrees F, and the relative humidity of 60% or less. It is important that the air conditioning system (HVAC) be kept on 24 hours a day, 7 days a week. Inconsistent operation or fluctuations in the temperature and humidity are the cause of many serious mold outbreaks.

Humidity
Humidity is simply vaporized water in the air. Your breath contains hundreds of droplets of invisible water vapor. You can see them when you breathe on a pair of cold glasses.

The term most often used to define the amount of water vapor in the air is "relative humidity." Relative humidity is the percentage of water vapor in the air at a specific temperature, compared to the amount of water vapor the air is capable of holding at that temperature. Warm air holds more water vapor than cold air. When air at a certain temperature contains all the water vapor it can hold at that temperature, its relative humidity is 100 percent. If it contains only half the water vapor it is capable of holding at that temperature, the relative humidity is 50 percent.

If the outside air temperature in winter is 0°F and the relative humidity is 75 percent, that same air inside your 70°F home will have a four percent relative humidity. The Sahara Desert has an average relative humidity of 25 percent.

When air is saturated with water vapor, it has reached the dew point; at this point, water vapor condenses and produces visible water or "condensation." In winter it usually occurs first on windows. When warm, moist air comes in contact with a cold window, air temperature drops and it can no longer hold the water vapor; condensation results.

Desirable Humidity Levels
The human body is comfortable when relative humidity ranges between 20 and 60 percent. In your home, an average relative humidity of 35 to 40 percent is appropriate when the outside temperature is 20°F or above. However, during cold weather, higher humidity ranges may cause structural damage because of condensation on windows and on the inside of exterior walls. As outdoor temperatures fall, condensation problems inside may develop.

The construction of a home also influences how much humidity is desirable. Tightly constructed buildings with properly installed vapor barriers and tight fitting doors and windows retain more heat and moisture. This is where mechanical ventilation becomes important. If a home does not have the proper mechanical ventilation, excess water vapor can move through walls and ceilings, causing wet insulation, peeling paint, and mold on walls and woodwork.

The recommended relative humidity is less than 50%.  Maintaining relative humidity below 50% inhibits mold and mildew growth, dust mite infestations, and bacteria. This lower relative humidity also reduces the out-gassing of volatile organic compounds (VOC’s). Molds are incapable of obtaining the moisture needed for their development directly from the atmosphere, but they can obtain it from a substrate, which has absorbed moisture from moist air (60% to 100% relative humidity). The relative humidity of the air has an indirect effect on fungal growth, and the more hygroscopic a material is, the more susceptible it is to mold growth. The minimum moisture content at which mold growth occurs depends on the material and usually ranges from 10% to 14%. Suitable substrates include carpet fibers, gypsum, concrete, bricks, etc.

Mold spores are everywhere all the time, entering from outdoor air as well as on pets and clothing. A mold spore landing on an indoor surface is likely to be insignificant and amount to little more than a common component of indoor dust, until such a mold spore lands on a moist organic surface (such as drywall.) High indoor humidity causes the surface moisture level to be sufficient for mold sporulation.  Since a mold spore requires moisture to propagate and grow, the indoor humidity level is a key gating factor in the control of indoor mold (and dust mites) in buildings.

Certain common mold genera and species, such as some members of the Aspergillus sp. and others grow readily on common building materials if they also have enough moisture. While there are fungal species that are able to grow under a remarkably wide range of environmental conditions, keeping indoor humidity at the appropriate level will reduce the chances of growth of the most common indoor problem molds.

High indoor humidity can encourage more issues than indoor mold. The same moisture conditions that support growth of problematic indoor molds also encourage the development of bacterial hazards, dust mite populations, mite fecal allergen problem, and possibly other insect problems in buildings.

The same measures of humidity control to prevent mold growth are needed to discourage the dust mite population that exists in all living areas. Measures including choosing and maintaining the proper humidity level to avoid indoor mold will also work to minimize the level of dust mites and dust mite allergens.

Keep the indoor humidity level in the mid-comfort range. A maximum indoor relative humidity of 50% RH may be acceptable, 45% RH better. At 60% indoor RH, we're entering the indoor mold-formation risk zone of high interior moisture in building wall or ceiling cavities or on wall and floor surfaces, possibly conducive to mold growth.


John Lapotaire, CIEC
Florida Indoor Air Quality Solutions
www.FloridaIAQ.com


Add a Comment

(Enter the numbers shown in the above image)


Follow jlapotaire on Twitter


Review microshield-es.com on alexa.com
   

[Valid RSS]
Add this Content to Your Site
   


Latest Top (12) News


EPISODE511: Chuck Violand, Ross Riek, Owen Boak and The Restoration Global Watchdog!
This past June RIA held its first International restoration conference and trade show on Australia’s beautiful Sunshine Coast. The event which will be an annual offering in the region was organized and delivered by RIA’s Australasian Council. The local RIA conference planning committee collaborated with the Australian IAQA chapter leadership and featured several education sessions by local leading IAQ experts. Mold seemed to be a hot topic at the conference with several labs exhibiting at the trade show! The event was also attended by IICRC leadership and several other regional dignitaries from related segments of the cleaning, restoration and remediation industries.

Thu, 03 Jan 2019 15:00:00 -0600


EPISODE497 - Radio Joe and the Z-man – Using Building Science & EPA’s Moisture Control Guide to Improve Indoor Air!
Today Radio Joe and the Z-man will be discussing how to solve indoor environmental quality problems by using building science fundamentals and the “EPA Moisture Control Guide”. To get at the root of IEQ problems you must understand buildings and building science. Today we will discuss some great information from people like Joe Lstiburek, Terry Brennan, Bill Rose, Mike McGuinness and Lew Harriman. We start with an overview of building science concepts that will help you solve problems. Our foundation will be the 4 P’s (people, pollutant, pathway, pressurization). From there we will go into how to use the wealth of information in the EPA “Moisture Control Guide” and then go through some case studies. On a future show we will get into how to include the information in your reports

Thu, 11 Oct 2018 11:00:00 -0500


EPISODE509: Nick Hurst – US EPA, Indoor Environments Division – The EPA Indoor airPLUS Program
This week on IAQradio+ we welcome Nick Hurst. Nick is an Environmental Protection Specialist with the US EPA and the Program Manager of EPA’s Indoor airPLUS label for new homes. He has been involved in the construction industry for over 17 years as a self-employed remodeling contractor, project manager, green building consultant, and trainer. Nick earned a Master’s in Technology concentrating in Building Science from Appalachian State University in Boone, NC, and he later served as Education and Outreach Director for the North Carolina Energy Efficiency Alliance at ASU’s Energy Center. Before coming to EPA, Nick also worked as a consultant at ICF in their Federal Energy Efficiency portfolio. Nick is also a BPI Building Analyst and participates with a number of standard setting organizations and technical committees in the building industry.

Fri, 29 Jun 2018 15:30:00 -0500


EPISODE508: HOMEChem Open House – House Observations of Microbial and Environmental Chemistry
This week on IAQradio+ will be broadcasting live from the Open House event for the HOMEChem study at the University of Texas Austin’s, J.J. Pickle Research Campus. The HOMEChem experiment (House Observations of Microbial and Environmental Chemistry) incorporates state-of-the-art measurements performed by over 20 investigators and their teams from the fields of chemistry, microbiology, and engineering. This experiment engages far more institutions and disciplines than ever applied to the study of a home. This research study is sponsored by the Alfred P. Sloan Foundation Chemistry of Indoor Environments Program and it will take place this summer at the University of Texas at Austin’s UTest House. Our guests for this special show are Marina Vance (HOMEChem Co-PIs / organizer) Delphine Farmer (HOMEChem Co-PIs / organizer) Atila Novoselac (HOMEChem host, specialist on the UTest house) Rich Corsi (HOMEChem host, indoor air specialist) Dr. Richard L. Corsi is the Joe J. King Chair in Engineering #2 in the Department of Civil, Architectural and Environmental Engineering (CAEE) at The University of Texas at Austin (UT Austin). He has served on the faculty of CAEE at UT Austin for nearly 25 years, after starting his career in the School of Engineering at the University of Guelph in Ontario, Canada. Dr. Corsi is highly regarded as an educator. He has received numerous teaching awards, and in 2015 was inducted into the Academy of Distinguished Teachers, an honor held for the top 5% of teachers across UT Austin. He also received a Regents’ Outstanding Teaching Award for the entire UT system in 2016. Dr. Corsi’s research focuses on sources, physics and chemistry of indoor air pollution, particularly as related to pollutant interactions with indoor materials and innovative strategies for using such interactions to reduce human exposure to air pollution of both outdoor and indoor origin. He has served as principal investigator on over 70 projects, as major advisor to over 50 undergraduate and 70 graduate students, and as co-author on over 300 journal/conference papers, reports, and book chapters. His work has been featured in National Geographic, The Economist, Business Week, National Wildlife, Prevention, Men’s Health, National Public Radio’s Science Friday, Science Studio, the Academic Minute, the Canadian television series The Nature of Things, and more. Delphine Farmer, PhD Dr. Delphine Farmer is an Associate Professor in the Department of Chemistry at Colorado State

Fri, 22 Jun 2018 15:30:00 -0500


EPISODE508: HOMEChem Open House – House Observations of Microbial and Environmental Chemistry
This week on IAQradio+ will be broadcasting live from the Open House event for the HOMEChem study at the University of Texas Austin’s, J.J. Pickle Research Campus. The HOMEChem experiment (House Observations of Microbial and Environmental Chemistry) incorporates state-of-the-art measurements performed by over 20 investigators and their teams from the fields of chemistry, microbiology, and engineering. This experiment engages far more institutions and disciplines than ever applied to the study of a home. This research study is sponsored by the Alfred P. Sloan Foundation Chemistry of Indoor Environments Program and it will take place this summer at the University of Texas at Austin’s UTest House. Our guests for this special show are Marina Vance (HOMEChem Co-PIs / organizer) Delphine Farmer (HOMEChem Co-PIs / organizer) Atila Novoselac (HOMEChem host, specialist on the UTest house) Rich Corsi (HOMEChem host, indoor air specialist) Dr. Richard L. Corsi is the Joe J. King Chair in Engineering #2 in the Department of Civil, Architectural and Environmental Engineering (CAEE) at The University of Texas at Austin (UT Austin). He has served on the faculty of CAEE at UT Austin for nearly 25 years, after starting his career in the School of Engineering at the University of Guelph in Ontario, Canada. Dr. Corsi is highly regarded as an educator. He has received numerous teaching awards, and in 2015 was inducted into the Academy of Distinguished Teachers, an honor held for the top 5% of teachers across UT Austin. He also received a Regents’ Outstanding Teaching Award for the entire UT system in 2016. Dr. Corsi’s research focuses on sources, physics and chemistry of indoor air pollution, particularly as related to pollutant interactions with indoor materials and innovative strategies for using such interactions to reduce human exposure to air pollution of both outdoor and indoor origin. He has served as principal investigator on over 70 projects, as major advisor to over 50 undergraduate and 70 graduate students, and as co-author on over 300 journal/conference papers, reports, and book chapters. His work has been featured in National Geographic, The Economist, Business Week, National Wildlife, Prevention, Men’s Health, National Public Radio’s Science Friday, Science Studio, the Academic Minute, the Canadian television series The Nature of Things, and more. Delphine Farmer, PhD Dr. Delphine Farmer is an Associate Professor in the Department of Chemistry at Colorado State

Fri, 22 Jun 2018 15:30:00 -0500


EPISODE508: HOMEChem Open House – House Observations of Microbial and Environmental Chemistry
This week on IAQradio+ will be broadcasting live from the Open House event for the HOMEChem study at the University of Texas Austin’s, J.J. Pickle Research Campus. The HOMEChem experiment (House Observations of Microbial and Environmental Chemistry) incorporates state-of-the-art measurements performed by over 20 investigators and their teams from the fields of chemistry, microbiology, and engineering. This experiment engages far more institutions and disciplines than ever applied to the study of a home. This research study is sponsored by the Alfred P. Sloan Foundation Chemistry of Indoor Environments Program and it will take place this summer at the University of Texas at Austin’s UTest House. Our guests for this special show are Marina Vance (HOMEChem Co-PIs / organizer) Delphine Farmer (HOMEChem Co-PIs / organizer) Atila Novoselac (HOMEChem host, specialist on the UTest house) Rich Corsi (HOMEChem host, indoor air specialist) Dr. Richard L. Corsi is the Joe J. King Chair in Engineering #2 in the Department of Civil, Architectural and Environmental Engineering (CAEE) at The University of Texas at Austin (UT Austin). He has served on the faculty of CAEE at UT Austin for nearly 25 years, after starting his career in the School of Engineering at the University of Guelph in Ontario, Canada. Dr. Corsi is highly regarded as an educator. He has received numerous teaching awards, and in 2015 was inducted into the Academy of Distinguished Teachers, an honor held for the top 5% of teachers across UT Austin. He also received a Regents’ Outstanding Teaching Award for the entire UT system in 2016. Dr. Corsi’s research focuses on sources, physics and chemistry of indoor air pollution, particularly as related to pollutant interactions with indoor materials and innovative strategies for using such interactions to reduce human exposure to air pollution of both outdoor and indoor origin. He has served as principal investigator on over 70 projects, as major advisor to over 50 undergraduate and 70 graduate students, and as co-author on over 300 journal/conference papers, reports, and book chapters. His work has been featured in National Geographic, The Economist, Business Week, National Wildlife, Prevention, Men’s Health, National Public Radio’s Science Friday, Science Studio, the Academic Minute, the Canadian television series The Nature of Things, and more. Delphine Farmer, PhD Dr. Delphine Farmer is an Associate Professor in the Department of Chemistry at Colorado State

Fri, 22 Jun 2018 15:30:00 -0500


EPISODE507: Radio Joe & Bob Krell Report LIVE – IAQA Mid Atlantic Conference – Eva King, PhD & Wei Tang, PhD
This week on IAQradio+ and Healthy Indoors Magazine are coordinating on a live show from the IAQA Mid Atlantic Conference in Princeton, New Jersey. Today’s guests include Eva King, PhD and Wei Tang, PhD. Dr. Eva King, CIEC is the Principal Scientist and Founder of AURA EnviroScience. Eva received her Masters degree in Biochemistry from the University of Bielefeld, Germany, and her Doctorate from the University of Oxford, UK. Dr. Wei Tang is the founder, President and Laboratory Director of QLab in Metuchen, New Jersey. Dr. Eva King, CIEC is the Principal Scientist and Founder of AURA EnviroScience. Eva received her Masters degree in Biochemistry from the University of Bielefeld, Germany, and her Doctorate from the University of Oxford, UK. She has been involved in investigations and research into indoor environments and health, allergens, asthma and immunology for over 10 years, and has developed a wide range of new methods for exposure assessment. She has helped clients in different industry sectors, accelerating product development and validation, and assisted in clinical trials and other research studies. Her work has been published in many peer-reviewed scientific publications. Eva is an active member of the indoor air quality, industrial hygiene, and allergy research communities, and served on the Board of Directors of IAQA, and as Convention Committee Chair between 2013 and 2017. Dr. Wei Tang is the founder, President and Laboratory Director of QLab in Metuchen, New Jersey. Dr. Tang graduated from Cornell University with his Master and Ph.D. degrees in Soil Microbiology. He has conducted numerous research projects in Cornell University Soil Microbiology Laboratory in using microorganisms for bioremediation of environmental organic pollutants. His work in recent years has been focused on microbiological sampling and analysis methods for indoor environmental quality assessment. He has taught professional development courses and presented frequently at national conferences on analysis of indoor microorganisms and also on various topics including investigation and remediation of microbial growth in indoor environment. Dr. Tang is the inventor of several advanced microbial sampling devices including AccuScience Triple Gel-Tape, Sweep-Swab and Sponge-Swab. He also developed several advanced analytical methods such as AccuScience High Performance Spore Count and AccuScience Triplicate Analysis. Dr. Tang served on IAQA Board of Directors for three terms. H

Fri, 15 Jun 2018 15:15:00 -0500


EPISODE507: Radio Joe & Bob Krell Report LIVE – IAQA Mid Atlantic Conference – Eva King, PhD & Wei Tang, PhD
This week on IAQradio+ and Healthy Indoors Magazine are coordinating on a live show from the IAQA Mid Atlantic Conference in Princeton, New Jersey. Today’s guests include Eva King, PhD and Wei Tang, PhD. Dr. Eva King, CIEC is the Principal Scientist and Founder of AURA EnviroScience. Eva received her Masters degree in Biochemistry from the University of Bielefeld, Germany, and her Doctorate from the University of Oxford, UK. Dr. Wei Tang is the founder, President and Laboratory Director of QLab in Metuchen, New Jersey. Dr. Eva King, CIEC is the Principal Scientist and Founder of AURA EnviroScience. Eva received her Masters degree in Biochemistry from the University of Bielefeld, Germany, and her Doctorate from the University of Oxford, UK. She has been involved in investigations and research into indoor environments and health, allergens, asthma and immunology for over 10 years, and has developed a wide range of new methods for exposure assessment. She has helped clients in different industry sectors, accelerating product development and validation, and assisted in clinical trials and other research studies. Her work has been published in many peer-reviewed scientific publications. Eva is an active member of the indoor air quality, industrial hygiene, and allergy research communities, and served on the Board of Directors of IAQA, and as Convention Committee Chair between 2013 and 2017. Dr. Wei Tang is the founder, President and Laboratory Director of QLab in Metuchen, New Jersey. Dr. Tang graduated from Cornell University with his Master and Ph.D. degrees in Soil Microbiology. He has conducted numerous research projects in Cornell University Soil Microbiology Laboratory in using microorganisms for bioremediation of environmental organic pollutants. His work in recent years has been focused on microbiological sampling and analysis methods for indoor environmental quality assessment. He has taught professional development courses and presented frequently at national conferences on analysis of indoor microorganisms and also on various topics including investigation and remediation of microbial growth in indoor environment. Dr. Tang is the inventor of several advanced microbial sampling devices including AccuScience Triple Gel-Tape, Sweep-Swab and Sponge-Swab. He also developed several advanced analytical methods such as AccuScience High Performance Spore Count and AccuScience Triplicate Analysis. Dr. Tang served on IAQA Board of Directors for three terms. H

Fri, 15 Jun 2018 15:15:00 -0500


EPISODE505 - Ed Cross – “The Restoration Lawyer” – Restoration Industry Legal Issues & Answers
This week on IAQradio+ we welcome “The Restoration Lawyer” Ed Cross to discuss current legal issues and answers for restoration professionals. Mr. Cross has built a successful law practice that specially caters to the needs of insurance damage repair contractors and remediators. Mr. Cross received a Bachelor’s Degree in Speech Communications with an emphasis on Public Speaking from California State University at Northridge in 1986 (Dean’s Honor Roll), and his Juris Doctor Degree from Western State University in Fullerton California. Ed is also well known for his risk management advice, cleaning and restoration contracts and related forms available for free and/or for purchase on his website edcross.com . These are simple one page forms in plain English that protect payment rights and deter lawsuits. He has recently added contract forms specific to the needs of those doing work in Texas and Florida.

Fri, 25 May 2018 15:15:00 -0500


EPISODE505 - Ed Cross – “The Restoration Lawyer” – Restoration Industry Legal Issues & Answers
This week on IAQradio+ we welcome “The Restoration Lawyer” Ed Cross to discuss current legal issues and answers for restoration professionals. Mr. Cross has built a successful law practice that specially caters to the needs of insurance damage repair contractors and remediators. Mr. Cross received a Bachelor’s Degree in Speech Communications with an emphasis on Public Speaking from California State University at Northridge in 1986 (Dean’s Honor Roll), and his Juris Doctor Degree from Western State University in Fullerton California. Ed is also well known for his risk management advice, cleaning and restoration contracts and related forms available for free and/or for purchase on his website edcross.com . These are simple one page forms in plain English that protect payment rights and deter lawsuits. He has recently added contract forms specific to the needs of those doing work in Texas and Florida.

Fri, 25 May 2018 15:15:00 -0500


EPISODE502: Tedd Benson – Bensonwood & Unity Homes Bridging the Gap! The Search for a Better Way to Build & Bob Krell – Healthy Indoors Magazine An Industry Update
This week on IAQ Radio+ we look forward to a great discussion on better ways to build and an industry update. Tedd Benson of Bensonwood and Unity Homes and Bob Krell of Healthy Indoors Magazine are our guests this week. Tedd Benson the founder of Bensonwood (1973) and Unity Homes (2012), has devoted his life to developing a better way to build. A key figure in the revival of timber framing in America, he was one of the founders of the Timber Framers Guild of North America (1984) and authored four books on the subject. Through the decades, Bensonwood established itself as a creative leader in timber frame design, engineering, craftsmanship, and CAD-CAM technology.

Fri, 27 Apr 2018 14:45:00 -0500


EPISODE502: Tedd Benson – Bensonwood & Unity Homes Bridging the Gap! The Search for a Better Way to Build & Bob Krell – Healthy Indoors Magazine An Industry Update
This week on IAQ Radio+ we look forward to a great discussion on better ways to build and an industry update. Tedd Benson of Bensonwood and Unity Homes and Bob Krell of Healthy Indoors Magazine are our guests this week. Tedd Benson the founder of Bensonwood (1973) and Unity Homes (2012), has devoted his life to developing a better way to build. A key figure in the revival of timber framing in America, he was one of the founders of the Timber Framers Guild of North America (1984) and authored four books on the subject. Through the decades, Bensonwood established itself as a creative leader in timber frame design, engineering, craftsmanship, and CAD-CAM technology.

Fri, 27 Apr 2018 14:45:00 -0500
Follow Microshields IAQ News and Headlines Bloglines RSS Feed

Subscribe with Bloglines

 



IAQ News and Articles

Latest Top (10) News
http://recordings.talkshoe.com/rss1547.xml